Why the irrigation system does not work?

Why the irrigation system does not work?

Why the irrigation system does not work?

Regular watering is the basis of maintaining a healthy and beautiful lawn, but when the system fails, the consequences are seen quickly – withered grass, withered plants and uneven watering. Why the irrigation system does not work? That's a question, which many yard owners ask themselves, especially during the summer months. The reasons can be different - from technical malfunctions to problems with water pressure or controller settings. In this article, we will look at the most common causes and solutions, to restore your system to optimal condition.

Contents

Main reasons for the irrigation system not working

Problems with irrigation systems can have different origins. The most common are:

  • Low water pressure – with insufficient pressure, the sprinklers do not come out or water poorly.
  • Clogged nozzles – limestone accumulations, dirt or sand restricts the flow of water.
  • Defective controller – problems with the electronics or an incorrectly set watering schedule.
  • Broken pipes or connections – underground leaks lead to loss of pressure and uneven watering.
  • Damaged solenoid valves – they don't open, even with an active controller program.

How to diagnose the problem

Когато the irrigation system is not working, it is important to first determine if the problem is mechanical, electrical or water pressure related. Here are some steps, that you can take:

  • Check the water source – make sure, that there is sufficient pressure and that the tap is open.
  • Review the controller – check if it works, there is power and whether the program is activated.
  • Test the valves manually – so you will know if they are responding correctly to the electrical signal.
  • Inspect nozzles and pipes – look for leaks, blockages or damaged areas.
  • Check the filter - often its contamination is the cause of a drop in pressure.

Solutions and support

Once you determine the cause, follow these system recovery tips:

  • Clean the nozzles – take them out and wash them with clean water or a special anti-limescale agent.
  • Check and replace the valves – if they don't respond, they are probably for replacement.
  • Set up the controller – review watering times and zones; often the problem is in an incorrect program.
  • Fix the leaks – burst pipes must be replaced, to restore pressure.
  • Plan seasonal prevention – especially important is the spring check before the active season and the autumn drain before the winter.

If the problem is more complex or requires specialized intervention, rely on irrigation systems company like INO Park, which offers diagnostics, repair and maintenance of automatic irrigation systems in Burgas and the region.

Frequently asked questions (FAQ)

1. How to tell if there is a leak underground?

Check for wet spots on the grass or a drop in pressure in individual areas. If the system loses water, there is probably a hidden leak.

2. What to do, if only one zone is down?

The problem is probably with the particular valve or nozzles. Check cable and valve for defect.

3. Can I clean the nozzles myself??

Yes, but carefully - use a soft brush or needle, без да повредите пластмасовите части.

4. Колко често трябва да обслужвам системата?

Препоръчва се поне два пъти годишно – в началото на пролетта и преди зимата.

5. How to protect the system in winter?

Drain the water from the pipes and close the water source, to prevent frost cracking.

Conclusion

Когато the irrigation system is not working, this is usually a signal of a small, но навременна намеса. Проверете дюзите, клапаните и настройките на контролера, преди да търсите по-сериозен проблем. Редовната профилактика и поддръжка гарантират дълъг живот на системата и оптимално напояване на двора. А ако търсите професионална помощ – екипът на Ино парк е винаги готов да ви съдейства.

Check out more articles at USEFUL!

You can also follow us on our social networks: Facebook